CUMMINS CFP83 SERIES Manual do Utilizador descarregar pdf (Página 3)

Section 10 – Maintenance Specifications Page 10-3

CFP83 Series

Drawing No. 9777, Section 10, Rev. 02-07

General Engine Data

NOTE: The following engine and system specification data is extracted from the curves and data sheets that

were current when this document was prepared. Refer to Performance Curve Drawing 9744 and Data Sheet

Drawing 9745 for the most current information. Contact Cummins Fire Power at 920-337-9750 if current

information is required.

Refer to the base engine troubleshooting and repair manual for base engine coverage (see Service Literature

Section 8).

Model Cummins Engine Co. Base Engine Cummins Base Engine Fuel Rating

CFP83-F10 6CTA8.3G2 FR90242 / FR90243

CFP83-F20 6CTA8.3G2 FR90242 / FR90243

CFP83-F30 6CTA8.3G2 FR90242 / FR90243

CFP83-F40 6CTAA8.3G3 FR90940

Model Installation Drawing Configuration Number

CFP83-F10 8708 (see Section 13) D413034GX02

CFP83-F20 8708 (see Section 13) D413034GX02

CFP83-F30 8708 (see Section 13) D413034GX02

CFP83-F40 8710 (see Section 13) D413035GX02

Model Fuel System Aspiration

CFP83-F10 Bosch - P3000 Direct Injection Turbocharged, Jacket Water Aftercooled (JWAC)

CFP83-F20 Bosch - P3000 Direct Injection Turbocharged, Jacket Water Aftercooled (JWAC)

CFP83-F30 Bosch - P3000 Direct Injection Turbocharged, Jacket Water Aftercooled (JWAC)

CFP83-F40 Bosch - P7100 Inline Turbocharged, Charge Air Cooled

Type 4 Cycle; In-Line; 6 Cylinder

Firing Order 1-5-3-6-2-4

Rotation, Viewed from the Front of the Engine Clockwise

Compression Ratio: 16.8:1

Valves per cylinder: Inlet/Exhaust 1 / 1

Metric US

Bore 114 mm 4.49 in

Stroke 135 mm 5.32 in

Displacement 8.3 liters 505 in.

Intake Valve Clearance 0.30 mm 0.012 in

Exhaust Valve Clearance 0.61 mm 0.024 in

Dry Weight 790 kg 1742 lb

Wet Weight 823 kg 1815 lb

1 2 3 4 5 6 7 8 ... 11 12

Sem comentários

CUMMINS CFP83 SERIES Manual do Utilizador Página 3