CUMMINS N14 Especificações descarregar pdf (Página 150)

100

101

STC External Oil Plumbing - Installa-

tion

Connect the following lines to the STC oil control valve

and tighten them to the specified torque:

1. Fuel pressure sensing line - 9.5 N•m [84 in-lb]

2. Oil outlet line to tappets - 13.6 N•m [120 in-lb]

3. Oil vent line - 9.5 N•m [84 in-lb]

4. Oil supply line - 13.6 N•m [120 in-lb]

Install the check valve retaining clamp and check valve

on the cam follower stud.

Torque Value: 47 N•m [35 ft-lb]

The check valve must be installed so the stamped arrow

points in the direction of oil flow (from the oil rifle to the

STC valve).

Install the external oil manifold using new o-rings. Lubri-

cate the o-rings and the manifold connector bores with

vegetable oil.

Install the external oil manifold hold down capscrews.

Tighten the capscrews.

Torque Value: 12 N•m [105 in-lb]

Installthe manifold clips,capscrews, and spacers.Tighten

the capscrews.

Torque Value: 41 N•m [30 ft-lb]

Install the intake air tube and elbow if removed.

Torque Value: 34 N•m [25 ft-lb]

Remove the plug from the supply line and connect the

supply line to the external oil manifold.

Caution: Hold the oil manifold fitting hex with a backup

wrench while installing the supply line to avoid damag-

ing the manifold.

STC External Oil Plumbing - Installation Engine Assembly (00-02)

N14Page 0-130

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 150

Comentários a estes Manuais