CUMMINS N14 Especificações descarregar pdf (Página 369)

100

101

Assembly

Use clean 15W-40 oil to lubricate the drive shaft.

Use spacer mandrel, Part No. ST-1157, and an arbor

press to push the drive gear onto the drive shaft. If the

spacer mandrel is not available, install the gear onto the

shaft to the following dimension as measured from the

end of the shaft.

Installed Depth

mm in

27.43 MIN 1.080

27.69 MAX 1.090

Lubricating Oil Pump Driven Shaft -

Replacement (07-10)

Disassembly

Install the oil pump body in an arbor press with the cover

mounting surface of the body facing down.

Use a mandrel to push the driven shaft from the lubri-

cating oil pump body.

Inspection

Visually inspect the driven shaft bore in the lubricating oil

pump body for damage.

Measure the inside diameter of the driven shaft bore.

Driven Shaft Bore I.D.

mm in

22.263 MIN 0.8765

22.289 MAX 0.8775

NOTE: If the shaft bore diameter is not within specifications,

the pump body must be replaced.

Measure the driven shaft outside diameter in the press fit

area.

Driven Shaft Press Fit Area O.D.

mm in

22.301 MIN 0.8780

22.314 MAX 0.8785

Lubricating Oil System Lubricating Oil Pump Driven Shaft - Replacement (07-10)

N14 Page 7-27

1 2 ... 364 365 366 367 368 369 370 371 372 373 374 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 369

Comentários a estes Manuais