CUMMINS N14 Especificações descarregar pdf (Página 416)

100

101

Caution: The jaws of the vise must have copper plates

to prevent damage to the shaft.

Clamp the accessory drive shaft in a vise.

Apply LubriplateT 105 or its equivalent to the gear fit area

before installing the gear.

Place the accessory drive gear in an oven.

Caution: Do not exceed the temperature or time limits

with the gear in the oven. The gear will be damaged.

Heat the gear to 205° C [400° F] for a minimum of 1 hour

but no longer than 6 hours.

Caution: Wear asbestos gloves when handling heated

parts. Hot parts can cause serious personal injury.

Caution: The part number on the gear must be facing

away from the flange on the accessory drive shaft when

the gear is installed to prevent engine damage.

Remove the gear from the oven. Align the keyway in the

gear with the groove pin in the accessory drive, and install

the gear on the shaft within 30 seconds.

Caution: Keep the accessory drive shaft in a vertical

position until the gear has cooled. Do not use water to

reduce the cooling time; the gear will crack.

Accessory Drive Gear - Replacement (09-03) Drive Units

N14Page 9-12

1 2 ... 411 412 413 414 415 416 417 418 419 420 421 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 416

Comentários a estes Manuais