CUMMINS N14 Especificações descarregar pdf (Página 462)

100

101

Install the filter on the filter head and tighten the filter until

the gasket contacts the filter head surface.

Tighten the filter an additional one-half to three-fourths

(1/2 to 3/4) turn.

Fuel System Priming - PT System

To reduce engine cranking time, prime the fuel pump.

NOTE: If the fuel pump is dirty, clean the outside of the pump

near the filter screeen cap.

Remove the plug from the top of the fuel pump housing.

Fill the housing with clean fuel.

Install the plug in the fuel pump housing.

Torque Value: 27 N•m [20 ft-lb]

NOTE: If the priming plug is difficult to remove or the fuel

pump is a VS type, use clean fuel to fill the gear pump.

Remove the fuel supply hose at the fuel filter or the flow

meter and fill the hose with clean fuel.

Install the fuel supply hose to the filter head or flow meter.

Priming the Lubricating Oil and Fuel Systems (14-02) Engine Testing

N14Page 14-22

1 2 ... 457 458 459 460 461 462 463 464 465 466 467 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 462

Comentários a estes Manuais