CUMMINS N14 Especificações descarregar pdf (Página 424)

100

101

Turbocharger - Cleaning and Inspec-

tion (10-01)

Cleaning

Remove all carbon deposits and gasket material from the

gasket mating surfaces.

NOTE: Tape or plug all openings to prevent solvent or steam

from entering the oil cavities in the turbocharger.

Warning: When using a steam cleaner, wear protective

clothing and safety glasses or a face shield. Hot steam

can cause serious personal injury.

Use solvent or steam to clean the exterior of the turbo-

charger. Dry with compressed air.

Remove the tape and the plugs.

Inspection

Visually inspect the turbocharger housing for damage.

Replace if through cracks are found.

Visually inspect the turbine wheel and the compressor

impeller for fretting, cracked, or broken vanes. Replace

damaged parts.

Turn the compressor impeller in the direction shown to

inspect the turbine shaft for freedom of rotation

NOTE: The shaft must rotate freely. Replace damaged parts.

Refer to BHT3C Turbocharger Shop Manual, Bulletin No.

3810230.

Cracks on the turbocharger mounting flange longer than

15 mm [0.6-inch] are not acceptable.

Intake Air System Turbocharger - Cleaning and Inspection (10-01)

N14 Page 10-5

1 2 ... 419 420 421 422 423 424 425 426 427 428 429 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 424

Comentários a estes Manuais