CUMMINS N14 Especificações descarregar pdf (Página 78)

100

101

Install the o-rings and the crevice seals as follows:

1. Install the crevice seal (1) in the top groove.

2. Install the black o-rings (2 and 3) in the center and the

bottom grooves.

Caution: Make sure that the o-rings (2 and 3) are not

twisted. Twisted o-rings will not seal and will impact

liner protrusion.

Caution: Lower press fit (LPF) liners must not have seal-

ant applied to the counterbore. False liner protrusion

and liner damage will occur.

Counterbore sealing is accomplished with brass seal

rings. Seal rings are available in several thicknesses. The

correct thickness must be chosen to meet cylinder liner

protrusion specifications.

The desired protrusion is the total sum of the thickness

of the liner flange and the seal rings minus the counter-

bore depth.

Cylinder Liner Protrusion

mm in

0.10 MIN 0.004

0.18 MAX 0.007

Lubricate the crevice seal and the o-rings with vegetable

oil.

NOTE: Make sure the oil does not touch the counterbore or

the liner flange and that the o-rings do not move from the

grooves.

Cylinder Liners - Installation Engine Assembly (00-02)

N14Page 0-58

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 78

Comentários a estes Manuais