CUMMINS N14 Especificações descarregar pdf (Página 486)

100

101

Drain the lubricating oil pan. Install the drain plug.

Torque Value: 136 N•m [100 ft-lb]

Fill the oil pan to the ‘‘High’’ level mark with preservative

oil.

NOTE: Use Shell 66202, or an equivalent preservative oil.

The oil must meet Military Specification MIL-L-21260 Type

R10 Grade 2 SAE 30.

Remove the fuel lines to the engine fuel filter and the

injector return line.

NOTE: Use Daubert Chemical NoxRust No. 518 Preserva-

tive Oil, or equivalent. The oil must meet Military Specifi-

cation MIL-L-644 Type P-9.

Fill two containers, one with diesel fuel, the second with

preservative oil. Install both fuel lines in the container of

diesel fuel.

Start the engine.

After the engine is operating smoothly, transfer the fuel

supply line to the container of preservative oil. Operate

the engine until the preservative oil is coming out of the

injector return line.

Shut off the engine.

Install the fuel lines to the fuel filter and the injector return

line fitting.

Drain the preservative oil from the lubricating oil pan and

the oil filters.

Install the drain plug.

Torque Value: 136 N•m [100 ft-lb]

Drain and flush the cooling system.

NOTE: Use a rust inhibitor that will mix with water.

Engine Storage - Long Term (14-10) Engine Testing

N14Page 14-46

1 2 ... 481 482 483 484 485 486 487 488 489 490 491 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 486

Comentários a estes Manuais