CUMMINS N14 Especificações descarregar pdf (Página 323)

100

101

Measure the cam follower roller side clearance.

Roller Side Clearance

mm in

0.23 MIN 0.009

0.61 MAX 0.024

NOTE: If the roller does not rotate freely or the clearance is

not within specification, disassemble and check the roller

pin and the lever for damage. The pin can not be used again.

Cam Follower Socket - Replacement

(04-04)

NOTE: This procedure assumes that the roller is removed.

Use a pin punch to remove the socket.

NOTE: The roller must be removed to allow access to the

socket removal hole. Refer to Cam Follower Lever - Roller

Replacement (04-03).

The N14 valve and injector cam follower socket has an

identification groove around the outside diameter and two

marks 180 degrees apart on top of the socket.

Measure the parts.

(1) Socket O.D.

mm in

19.062 MIN 0.7505

19.088 MAX 0.7515

(2) Lever Bore I.D.

mm in

19.025 MIN 0.7490

19.050 MAX 0.7500

Cam Follower Assembly Cam Follower Socket - Replacement (04-04)

N14 Page 4-17

1 2 ... 318 319 320 321 322 323 324 325 326 327 328 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 323

Comentários a estes Manuais