CUMMINS N14 Especificações descarregar pdf (Página 182)

100

101

Warning: Use a face shield, rubber gloves, an apron,

and boots and obey the warning label on the cleaning

solution used to prevent personal injury.

Caution: Use a cleaning solution that will not damage

the camshaft bushings if the bushings have not been

removed.

Remove the block from the engine stand. Put the block

in a cleaning tank.

Follow the instructions of the manufacturer of the clean-

ing tank and the manufacturer of the cleaning solution.

NOTE: Cummins Engine Company, Inc., does not recom-

mend any specific cleaning solution.

The best results can be obtained by using a cleaning

solution that can be heated to 80° C to 95° C [180°Fto

200° F].

Use a cleaning tank that will mix and filter the cleaning

solution to get the best results.

Warning: Use a face shield, rubber gloves, an apron,

and boots and obey the warning label on the cleaning

solution used to prevent personal injury.

Remove the block from the cleaning tank.

Clean all the oil passages using a steam cleaner.

Caution: Make sure all the water is removed from the

capscrew holes and the oil passages to prevent rust

formation in the cylinder block.

Use compressed air to dry the block.

Warning: Naptha and methyl ethyl ketone (MEK) are

flammable materials and must be used with care. Do not

use starting fluid as a cleaning agent. It can cause per-

sonal injury if ignited.

Clean the cylinder block counterbores with a suitable

hydrocarbon solvent such as naptha, methyl ethyl ketone

(MEK), or trichlorethane 1, 1, 1 (methyl chloroform).

Cylinder Block - Cleaning and Inspection (01-02) Cylinder Block

N14Page 1-14

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 182

Comentários a estes Manuais