CUMMINS N14 Especificações descarregar pdf (Página 63)

100

101

Turn the puller jackscrew clockwise.

Use both hands to remove the liners.

Remove and discard the o-rings and the crevice seals.

NOTE: Do not discard the sealing rings which are located

under the cylinder liner flange. Sealing rings can be used

again.

Use a liquid metal marker to mark the cylinder number on

each liner.

If the sealing rings were removed, do the following:

1. Use a tag to mark the cylinder number.

2. Measure in several places and record the thickness of

the sealing rings used in each cylinder. The thickness

of the sealing ring is one factor in determining liner

protrusion. This information must be known when the

liners are installed in the engine.

Caution: The liner puller must be installed and used as

described to avoid damage to the cylinder block.

When using cylinder liner puller, Part No. 3375629, insert

the liner puller in the top of the cylinder block.

NOTE: The liner puller must be centered on the top of the

cylinder block.

Caution: The puller plate must not overlap the liner out-

side diameter.

NOTE: The puller plate must be parallel to the main

bearing saddles.

Turn the puller jackscrew clockwise.

Use both hands to remove the liner.

Remove and discard the crevice seals and the o-rings.

NOTE: Do not discard the sealing rings which are located

under the liner flange. Sealing rings can be used again.

Engine Disassembly (00-01) Cylinder Liners - Removal

N14 Page 0-43

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 586 587

Comentários a estes Manuais

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificações Página 63

Comentários a estes Manuais